setFeedbackFrequency sets the feedback polling frequency [Hz]
setFeedbackFrequency(frequency) sets the target frequency
in Hz at which feedback requests get sent out.
The default feedback frequency for a new group is 100 Hz. A
rate of 0.0 stops sending outgoing feedback requests.
Note that the scheduler will try it's best effort to reach
the set frequency, but the actual arriving rate may be
lower as it is limited by the underlying operating system
as well as potential hardware constraints.
% Estimate the 'real' incoming feedback frequency
targetFrequency = 100; % [Hz]
pauseTime = 10; % [s]
log = group.stopLog();
realFrequency = length(log.time) / pauseTime;